Skip to main content
DIYCar Search

Search

Car Battery Types: AGM vs Flooded vs EFB, Explained

Posted by Reviewed by DIYCar Editorial Team Review date Posted Topic: Battery

The three common lead-acid starter battery types are flooded (liquid electrolyte, vented), EFB (an enhanced flooded design for start-stop cars) and AGM (a sealed design where glass mat holds the electrolyte). Which one your car needs is set by the manufacturer, so check the owner's manual and the old battery's label before buying, and do not swap chemistry without approval.

Close-up of the plain top of a black car battery with a terminal post at each edge of the frame

Section of: How to Replace a Car Battery Safely, Step by Step

A car’s starter battery is almost always a lead-acid battery, but it comes in more than one construction. This page explains flooded, EFB and AGM batteries so you can read a label or a quote. For the full job, see how to replace a car battery, and for the price side see what drives the price.

The three main types and how they work

Flooded. A flooded battery has electrodes submerged in a free-flowing liquid electrolyte, per BCI, with open vents; these batteries generally must stay nearly upright to avoid spilling. BCI says lead flooded is the default chemistry in a group size.

EFB (enhanced flooded battery). BCI describes an EFB as a vented, flooded lead-acid starter battery with additional design features, with upgrades for cycling and longer life, especially in start-stop vehicles. It is also called an Advanced Flooded Battery.

AGM (absorbent glass mat). AGM is a VRLA (valve-regulated) design. The separator is a non-woven material of glass microfibers that holds the electrolyte in place so none is free to spill, and it lets the charging gases recombine, according to BCI.

Which type your car needs

Your owner’s manual sets the type. Cars with start-stop systems are the ones where the type matters most, since BCI describes EFB as targeted at start-stop vehicles. Treat the following as a rule: buy the chemistry the car originally had, or the chemistry the manual now specifies, and never downgrade. If you are unsure, ask the seller to confirm fitment. For a quick comparison, see the table above and the verdict that follows.

Group size, CCA and reserve capacity

Three labels tell you whether a battery fits and performs.

  • Group size. BCI says a group size classifies a battery by voltage, maximum overall dimensions, terminal arrangement and special features that may affect fit. Batteries in the same group must be the same size within 2 mm, and the terminals must align with the vehicle’s cables.
  • Cold cranking amps (CCA). BCI defines CCA as the current a new, fully charged and conditioned battery at 0 F (-18 C) can continuously deliver for 30 seconds while keeping at least 1.20 volts per cell (7.2 volts for a 12-volt battery).
  • Reserve capacity (RC). BCI describes RC as the minutes a new, fully charged battery at 80 F (26.7 C) can deliver 25 amperes before reaching 1.75 volts per cell.

Lifespan factors

We have no sourced lifespan figure to give you, and a number would only mislead. What we can say is that a battery’s life depends on how it is used and charged, so a manufacturer’s warranty terms and the maker’s guidance are better guides than a generic number. Keep terminals clean, the hold-down tight and the case free of damage.

Charging differences

Use a charger whose instruction manual lists your chemistry, and follow its instructions for selecting a mode. Read the full steps in how to charge a car battery.

Where to find your battery spec

Look in three places: the owner’s manual’s battery or specifications section, the label on the old battery, and a fitment lookup at a battery seller, confirmed against the manual. For job safety, see the safety rules for home car work.

Flooded, EFB and AGM starter batteries compared
FeatureFloodedEFBAGM
ConstructionElectrodes in free-flowing liquid electrolyte, open ventsVented flooded design with added features for cycling and lifeVRLA design; glass-microfiber separator holds the electrolyte
Spill and orientationGenerally must stay nearly upright to avoid spillingVented, so treat like flooded unless the maker says otherwiseElectrolyte is held in the mat, so none is free to spill
Where it is usedThe default chemistry in a BCI groupEspecially start-stop vehicles, per BCIDesignated AGM in the group size; used where the maker specifies it
ChargerUse a charger that lists standard lead-acidCheck the charger's manual for the modeUse a charger that lists AGM or has an AGM mode

Buy the type your owner's manual and the original battery's label specify. If the car is start-stop equipped, expect an EFB or AGM requirement, and do not downgrade to plain flooded. If you are unsure, ask the seller to confirm fitment for your exact vehicle.

Quick answers

Can I put an AGM in a car that came with flooded?

Do not assume it. BCI treats chemistry as one of the characteristics of a group size, so the type is part of the fit. Check your owner's manual and the charging system requirements, and ask the seller to confirm fitment for your exact vehicle. The reverse swap, putting flooded into a car that specifies AGM or EFB, is the one to avoid.

What does CCA mean?

CCA means cold cranking amps. BCI defines it as the current a new, fully charged and conditioned battery at 0 F (-18 C) can continuously deliver for 30 seconds while holding at least 7.2 volts on a 12-volt battery. It is a manufacturer's rating, so compare ratings only against the minimum in your owner's manual rather than treating a higher number as always better.

What is reserve capacity?

Reserve capacity is a time rating. BCI describes it as the number of minutes a new, fully charged battery at 80 F (26.7 C) can deliver a continuous 25 amperes before the voltage falls to 1.75 volts per cell. Compare it only against the specification in your owner's manual.

Is a maintenance-free battery the same as AGM?

Not necessarily. AGM is a specific design that BCI describes as using a glass-microfiber separator to hold the electrolyte. Maintenance-free is not a chemistry name, so look for the chemistry on the label or in the maker's specifications rather than relying on that phrase.

Do I need a different charger for AGM?

Use a charger whose instruction manual lists your battery's chemistry, and select the mode it describes for that chemistry. If the charger does not list your chemistry, do not use it. Read the charger's manual and your vehicle's manual before connecting.

Where do I find my car's required battery type?

Start with the owner's manual, which gives the battery specification. The old battery's label usually shows the group size, CCA rating and chemistry designation. If neither is clear, ask a battery seller to look up your vehicle, and confirm the result against the manual. Do not guess, because the wrong size or chemistry can fail to fit or underperform.

Where we got this

  1. Battery Council International: Glossary of Battery Terms (batterycouncil.org)
  2. Battery Council International: BCI Group Sizes (batterycouncil.org)
  3. Battery Council International: About Lead Batteries (batterycouncil.org)

Further guides

Top of page