Skip to main content
DIYCar Search

Search

How Many Quarts of Oil Does My Car Need?

Posted by Reviewed by DIYCar Editorial Team Review date Posted Topic: Oil and Basics

The number of quarts of oil your car needs is printed in your owner's manual, in the capacity table for your exact engine. It varies between engines, so there is no safe general figure. Pour in a little less than the listed amount, check the dipstick, and top up in small steps until the level sits between the marks.

Amber engine oil pouring from a plastic bottle through a metal funnel into an engine's oil filler opening

Section of: How to Change Oil in a Car: Step-by-Step for Beginners

How many quarts of oil your car takes is not one number for every car. It is a figure in your owner’s manual for your exact engine. This page shows where to find it and how to fill to the right level. It supports the full guide, how to change oil.

Short answer: it is in the owner’s manual

Open the manual’s capacity table for engine oil and find the line for your engine. The table is usually in the technical specifications chapter, headed something like “Recommended lubricants and capacities.” Write down both the amount and the viscosity grade.

One maker’s table shows why a guess fails: it lists 3.6 liters for one engine and 4.0 liters for two others, in the same model family. That is about 3.8 and 4.2 US quarts. Your engine may be different again.

Where to find it

  1. The owner’s manual, printed or on the maker’s owner website.
  2. The maker’s owner site, searched by year, model and engine.
  3. A shop or dealer, who can confirm the capacity for your VIN.

A parts-store lookup can help you find the oil, but the manual is the reference to check it against.

Capacity with and without the filter

Read how your manual words the capacity. The table we cite says “drain and refill” and does not say whether the filter is counted. A new filter holds oil as well, so treat the listed amount as a starting point and finish by checking the dipstick. If your manual says “with filter”, that is the one to use when you change the filter.

Add oil gradually and check the dipstick

  1. With the car level and the engine off for several minutes, pour in a little less than the listed amount.
  2. Wait a minute for the oil to settle, then pull the dipstick, wipe it, push it fully in, and pull it out again.
  3. Read the level against the marks. Add small amounts and recheck until it is between them.
  4. Run the engine briefly, look for leaks, switch it off, wait, and check again.

A dipstick with the maximum mark nearer the handle, the minimum mark nearer the tip and the safe band between them A dipstick resting on a clean rag showing a film of amber oil at its tip

What overfilling and underfilling do

Keep the level between the marks. Too little oil is a risk to the engine, and too much is outside what the maker intended. If you have overfilled by more than a little, follow your manual or have a shop correct it before you drive. If the car shows an oil warning light, stop and have it checked.

Know the grade as well as the amount: see synthetic oil intervals and the interval guide. If you need to lift the car to reach the drain plug, follow the jacking guide, and read before-you-start safety guide first. The wider list of routine checks puts oil in context.

Quick answers

Do 4-cylinder engines always take 4 quarts?

No. Capacity depends on the engine, not the cylinder count. One maker's manual lists 3.6 liters for one engine and 4.0 liters for two others, which is about 3.8 and 4.2 US quarts. A round number in your head is not a substitute for the table in your manual. Look up your engine, and confirm with the dipstick.

What if I have no manual?

Look for the owner's manual on the vehicle maker's own owner website, or ask a dealer. Use the capacity table for your exact engine. If you cannot confirm the figure, do not guess: add a smaller amount than you think, check the dipstick, and add more only as needed.

Does the capacity include the filter?

Check the wording in your manual. The table we cite says drain and refill and does not state whether the filter is counted. Because a new filter takes some oil, expect to need a little more than the amount that drained out, then confirm the level on the dipstick after the engine has run and settled.

What happens if I overfill or underfill?

Keep the level between the dipstick's marks. Running low is a risk to the engine, and an overfilled engine is outside what the maker intended. If you overfill by more than a little, follow your manual's guidance, which may mean having a shop correct the level before you drive.

Do quarts and liters differ?

Yes. Many manuals give liters. One US quart is about 0.95 liters, so 4.0 liters is roughly 4.2 US quarts. Buy a little more than you need in case your measure is close to the line, and use the dipstick for the final amount, not the arithmetic.

Where we got this

  1. Kia Owner's Manual: Recommended lubricants and capacities (ownersmanual.kia.com)
  2. EPA: Managing, Reusing, and Recycling Used Oil (epa.gov)

Further guides

Top of page