Skip to main content
DIYCar Search

Search

Why Is My Check Engine Light On? Common Causes Explained

Posted by Reviewed by DIYCar Editorial Team Review date Posted Topic: Check engine light

A check engine light comes on when the onboard computer stores a fault in the engine or emissions systems, and the possible causes range from a loose gas cap to an engine misfire. The light itself does not say which; the stored code does. Read the code, check the gas cap, and treat a flashing light as urgent.

Open hood showing the full engine bay of a gasoline car seen from the front

Section of: Check Engine Light: What It Means and What to Do First

Many different faults can turn the light on, and the light itself does not say which one. That is why the stored code matters. This page lists the usual categories; start with our check engine light guide for the first steps, and see how to read check engine light codes to get the code.

Short answer: many causes, and the code tells you which

EPA says the light means the system has stored a fault code, and that a technician can read the code to diagnose the problem. EPA also says the OBD system monitors up to 11 emission-control subsystems, so there are many possible triggers. Common categories are below. We describe what each one is and how it relates to the light, not what to replace.

Loose or damaged gas cap

A loose gas cap is the simplest cause to rule out. EPA says it can cause a vapor leak that the system detects and that turns the light on, and that after the cap is tightened properly the light should go out within a few days. Check that the cap is tight and not cracked. The U.S. Department of Energy also gives a loose gas cap as an example of a minor cause.

Engine misfires

A misfire means a cylinder is not firing as it should. EPA says a flashing light indicates a rather severe misfire and that severe misfire can seriously damage components such as the catalytic converter, so treat flashing as urgent; see flashing check engine light. Ignition parts such as spark plugs are among the things a technician checks; see bad spark plug symptoms and changing the plugs yourself.

Sensors and the catalytic converter

The computer relies on sensors to judge how the engine and exhaust system are working, and it sets a code when a reading is out of range. Sensors and emission-control parts such as the catalytic converter are among the things involved. A code that names one of them is a starting point, not proof of a failed part, so diagnosis comes before replacement. EPA names the catalytic converter as a component a severe misfire can damage.

Vapor (EVAP) leaks

The fuel vapor system is the system a loose gas cap upsets, per EPA’s description of a vapor leak. The cap is one part of that system. A code about vapor leaks is a reason to check the cap first and then see a shop if it persists.

Other causes

Other systems report to the same light. Because the OBD system monitors up to 11 emission-control subsystems, the list is long, and a code is the only reliable way to narrow it. Your owner’s manual may add model-specific guidance. Use the OBD-II code lookup tool to look up the code once you have it.

What a code does not tell you

A code is a starting point, not a verdict. SAE J2012 defines standard trouble code formats and also reserves ranges for manufacturer-specific codes, so the exact meaning can depend on the vehicle. A code does not tell you which part has failed, how long the fault has existed, or whether a wiring or connector problem is behind it. Do not clear the code to see if it returns; see how to reset the check engine light. For safe habits on any job, read safe-work basics.

When to use a shop

Use a shop for a flashing light, power loss, a fuel smell, a code you cannot interpret or any repair involving fuel, brakes, airbags or hybrid high-voltage parts. This guide is for gasoline passenger cars; diesel differs, so see your manual.

Quick answers

Can a loose gas cap trigger the check engine light?

Yes. EPA says a loose gas cap can cause a vapor leak that the system detects, which turns the light on. After the cap is tightened properly, EPA says the dashboard light should go out within a few days. If it stays on, or if the car also runs badly, the cause is something else and the code should be read.

Can low oil trigger the check engine light?

The sources we use do not tie low oil to the check engine light, so do not rely on it. Low oil can still be serious: oil pressure and oil level warnings are separate indicators that your owner's manual describes. If an oil warning is on, stop safely and check the level. Do not drive a car that shows a red oil warning.

Can I find the cause without a scanner?

You can check obvious things, such as the gas cap and how the car feels, but the stored code is what points to the system involved. EPA says a technician can read it, and a basic code reader or lookup tool can give you the code. See our page on reading codes for the steps and for what the code does not tell you.

Why did the light come on and then go off?

EPA says the light can turn off on its own once the system no longer detects the problem over several consecutive checks. That can happen after something like a loose gas cap is fixed. It does not prove the cause is gone, so if it comes back or the car runs poorly, have the code read.

Does a code tell me which part to replace?

Not by itself. A code points to the system or circuit where the computer saw a problem, which is a starting point for diagnosis, not a parts list. Replacing a part based only on a code can waste money and leave the real fault in place. A technician tests the system to confirm the cause.

Is the light always serious?

No, but you cannot tell from the light alone. EPA says a steady light signals a need for service, not a need to stop the vehicle, while a flashing light indicates a rather severe misfire. The fueleconomy.gov page says the cause can be as minor as a loose gas cap or more serious. Read the code.

Where we got this

  1. EPA: Frequently Asked Questions About On-Board Diagnostics (nepis.epa.gov)
  2. EPA: Performing Onboard Diagnostic System Checks as Part of a Vehicle Inspection and Maintenance Program (nepis.epa.gov)
  3. U.S. DOE: fueleconomy.gov, Keeping Your Car in Shape (fueleconomy.gov)
  4. SAE International: J2012 Diagnostic Trouble Code Definitions (saemobilus.sae.org)

Further guides

Top of page